This XUSL2E Type 2 Safety Light Curtain is designed for hand detection of operator in the vicinity of hazardous machinery. Its transmitter-receiver system creates 16 light beams with a protected height of 310mm. Its PFHD reliability data is 2.55 x 10⁻⁸. It has an aluminum case and its integral LEDs offer a local Signaling for clearly display of device’s status. It can be used as standalone sensor (i.e without safety control unit) or in association with an appropriate safety control unit. It has 2 NO Solid State PNP safety outputs (OSSDs) and meets the requirements of category 2, performance level PL c, SIL 1 as described in EN/ISO 13849-1, EN/IEC 61508 and Type 2 in compliance with EN/IEC 61496-1, EN/IEC 61496-2. Its operating temperature range is -30°C to +55°C and the sensing distance is 0m to 4m or 0m to 12m selectable by wiring.
XUSL type 2 Hand protection – Std sensing range – Hp = 310 mm, R=30mm
XUSL type 2 Hand protection – Std sensing range – Hp = 310 mm, R=30mm
SKU: 9177938
Category: Proximity Sensors
Reviews (0)
Be the first to review “XUSL type 2 Hand protection – Std sensing range – Hp = 310 mm, R=30mm” Cancel reply
Related products
Inductive sensor XS3 M18 – 24..240VAC/DC – terminal
Inductive sensor XS3 M18 - 24..240VAC/DC - terminal
Inductive sensor XS1 M30 – L55mm – brass – Sn20mm – 12..24VDC – M12
Inductive sensor XS1 M30 - L55mm - brass - Sn20mm - 12..24VDC - M12
Inductive sensor XS5 Ø6.5 – L42mm – stainless – Sn1.5mm – 12..24VDC – M8
Inductive sensor XS5 Ø6.5 - L42mm - stainless - Sn1.5mm - 12..24VDC - M8
Inductive sensor XS7 26x26x13 – PBT – Sn10mm – 12..24VDC – M12 0.15m
Inductive sensor XS7 26x26x13 - PBT - Sn10mm - 12..24VDC - M12 0.15m
Test rod 14 mm for safety light curtains – finger protection
Test rod 14 mm for safety light curtains - finger protection
Inductive sensor XSE 26x26x45 – plastic – Sn10mm – 12..48VDC – M12 2m
Inductive sensor XSE 26x26x45 - plastic - Sn10mm - 12..48VDC - M12 2m

Reviews
There are no reviews yet.