This Modicon MCM standard (“non-safe”) communication module has one Modbus TCP/IP connection with a RJ45 connector. It is designed to monitor remotely your safety system with the commonly used Modbus TCP/IP protocol, without additional gateways. It has a rated supply voltage of 24V DC. It is furnished with screw clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. The non-safe communication modules are designed for diagnostics connection and data communication purposes to machine field bus or network systems. Its transmission rate varies from 10Mbit/s to 100Mbit/s. This communication module is connected to the safety controller via the backplane expansion connector. It weighs 0.3kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. The maximum cable distance between two devices is 100m. This Modicon MCM standard (“non-safe”) communication module is certified by RCM, CULus and TÜV. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The communication module instals on Omega 35mm DIN rail conforming to EN 50022, and is connected to the safety controller via the backplane expansion connector. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.
expansion module, Modicon MCM, Modbus TCPIP diagnostic, screw
expansion module, Modicon MCM, Modbus TCPIP diagnostic, screw
SKU: 508864
Category: Motion Control
Reviews (0)
Be the first to review “expansion module, Modicon MCM, Modbus TCPIP diagnostic, screw” Cancel reply
Related products
servo motor SH3 055 0,42Nm,key,multi,nobrake,90°conn.IP65/IP67,9k RPM
servo motor SH3 055 0,42Nm,key,multi,nobrake,90°conn.IP65/IP67,9k RPM
braking resistor – 72 ohm – 200 W – cable 0.75 m – IP65
braking resistor - 72 ohm - 200 W - cable 0.75 m - IP65
power cable – between servomotor BSH and servodrive – 4 x 2.5 mm2 – 15 m
power cable - between servomotor BSH and servodrive - 4 x 2.5 mm2 - 15 m
preassembled cord set for RS422 control – for LXM05 – 1.5 m
preassembled cord set for RS422 control - for LXM05 - 1.5 m
Absolute encoder Ø 90 single turn – through shaft 30 mm – push-pull 13-bit Gray
Absolute encoder Ø 90 single turn - through shaft 30 mm - push-pull 13-bit Gray
angular gearbox straight teeth GBY, Lexium, 80mm, reduction 5:1, 13arc.min, 67N.m
angular gearbox straight teeth GBY, Lexium, 80mm, reduction 5:1, 13arc.min, 67N.m
3-phase stepper motor – 6.78Nm – shaft Ø 14mm – L=128 mm – w/o brake – term box
3-phase stepper motor - 6.78Nm - shaft Ø 14mm - L=128 mm - w/o brake - term box
Reviews
There are no reviews yet.