This product is part of the Lexium ILA range, an offer of motion integrated drives for motion control. The motion integrated drive with a 6-pole AC synchronous servo motor features an integrated EtherNet/IP communication interface and untapped shaft without holding brake. It is an equipped with a single-turn encoder (16,384 points/turn). The AC synchronous servo motor with a rated supply voltage of 24V, 48V DC, a peak current consumption of 8500mA and a nominal speed of 3400RPM at 48V. The shaft dimensions are 9mm (diameter) x 20mm (length). It is furnished with industrial connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 163.8mm (length) x 57mm (width) and the centering collar dimensions are 1.6mm (depth) x 50mm (diameter) with 66.6mm mounting hole. It weighs 1.7kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3 2001, EN/IEC 50178, EN 61800-3 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 57mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
integrated drive ILA with servo motor – 24..48 V – EtherNet/IP – indus connector
integrated drive ILA with servo motor – 24..48 V – EtherNet/IP – indus connector
SKU: 507325
Category: Motion Control
Reviews (0)
Be the first to review “integrated drive ILA with servo motor – 24..48 V – EtherNet/IP – indus connector” Cancel reply
Related products
servo motor SH3 055 0,42Nm,key,multi,nobrake,90°conn.IP65/IP67,9k RPM
servo motor SH3 055 0,42Nm,key,multi,nobrake,90°conn.IP65/IP67,9k RPM
preassembled cord set for RS422 control – for LXM05 – 1.5 m
preassembled cord set for RS422 control - for LXM05 - 1.5 m
3-phase stepper motor – 6.78Nm – shaft Ø 14mm – L=128 mm – w/o brake – term box
3-phase stepper motor - 6.78Nm - shaft Ø 14mm - L=128 mm - w/o brake - term box
Integrated drive ILS with stepper motor – 24..48 V – EtherNet/IP – 3.5 A
Integrated drive ILS with stepper motor - 24..48 V - EtherNet/IP - 3.5 A
Incremental encoder Ø 58 – through shaft 14 mm – 1024 points – push-pull
Incremental encoder Ø 58 - through shaft 14 mm - 1024 points - push-pull
power cable – between servomotor BSH and servodrive – 4 x 2.5 mm2 – 15 m
power cable - between servomotor BSH and servodrive - 4 x 2.5 mm2 - 15 m
power cable 1,5m shielded 4x 0,82mm², BCH2 leads connection
power cable 1,5m shielded 4x 0,82mm², BCH2 leads connection
Reviews
There are no reviews yet.