TeSys GV electrical trip, MX shunt release, 100V AC 50Hz / 100-110V AC 60Hz, for motor circuit breakers GV2, GV3. It trips the circuit breaker when the control voltage is applied in limits 0.7-1.1 Uc with an impulse duration greater than 20ms or a maintained signal. To be mounted on right-hand side of the circuit breaker, connection by screw clamp terminals. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).
Shunt release (MX), TeSys Deca, 100V AC 50Hz
Shunt release (MX), TeSys Deca, 100V AC 50Hz
Related products
Encoder cable M17 from detached servo drive to SH motor with M23 4,0 m
Encoder cable M17 from detached servo drive to SH motor with M23 4,0 m
Variable speed drive ATV71 – 11kW-15HP – 240V – w/o EMC filter-graphic terminal
Variable speed drive ATV71 - 11kW-15HP - 240V - w/o EMC filter-graphic terminal
TeSys D contactor – 3P(3 NO) – AC-3 – <= 440 V 32 A – 115 V AC coil
TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 115 V AC coil
TeSys F – right-angled connector – short rear
TeSys F - right-angled connector - short rear
variable speed drive ATV660 – 90kW/125HP – 460 V
variable speed drive ATV660 - 90kW/125HP - 460 V
TeSys F contactor – 4P (4 NO) – AC-1 – <= 440 V 350 A – coil 24 V DC
TeSys F contactor - 4P (4 NO) - AC-1 - <= 440 V 350 A - coil 24 V DC
variable speed drive, Altivar Process ATV600, ATV650, 22kW, 30hp, 380…480V, IP55, UL type12, disconnect switch
variable speed drive, Altivar Process ATV600, ATV650, 22kW, 30hp, 380...480V, IP55, UL type12, disconnect switch
TeSys D IEC contactor, 18 A, 3 P, 10 HP at 480 VAC, nonreversing, 36 VAC 50/60 Hz coil
TeSys D IEC contactor, 18 A, 3 P, 10 HP at 480 VAC, nonreversing, 36 VAC 50/60 Hz coil
Reviews
There are no reviews yet.