This cordset is proposed as an accessory of variable speed drives Altivar, Lexium servo drives or Modicon controllers. It is equipped with 1 x 15-way high density male SUB-D connector. It enables the connection between an encoder and digital / analog encoder modules (for drives) or a controller.
cable for SSI serial incremental or absolute master encoders input – 1 m
cable for SSI serial incremental or absolute master encoders input – 1 m
Related products
variable speed drive, Altivar Machine ATV320, 0.37kW, 200 to 240V, 3 phases, compact
variable speed drive, Altivar Machine ATV320, 0.37kW, 200 to 240V, 3 phases, compact
5HP460V ATV61 w/ lonworksandconduitbox
5HP460V ATV61 w/ lonworksandconduitbox
variable speed drive, Altivar Process ATV600, ATV650, 22kW, 30hp, 380…480V, IP55, UL type12, disconnect switch
variable speed drive, Altivar Process ATV600, ATV650, 22kW, 30hp, 380...480V, IP55, UL type12, disconnect switch
Shaft coupling – for encoder – with spring Ø 6 to 12 mm
Shaft coupling - for encoder - with spring Ø 6 to 12 mm
IEC contactor, TeSys Deca, nonreversing, 20A resistive, 4 pole, 2 NO and 2 NC, 48VAC 50/60Hz coil, open style
IEC contactor, TeSys Deca, nonreversing, 20A resistive, 4 pole, 2 NO and 2 NC, 48VAC 50/60Hz coil, open style
TeSys F contactor – 4P (4 NO) – AC-1 – <= 440 V 350 A – coil 24 V DC
TeSys F contactor - 4P (4 NO) - AC-1 - <= 440 V 350 A - coil 24 V DC
braking resistor, Altivar, 2.5Ohms, 3.2kW, IP23
braking resistor, Altivar, 2.5Ohms, 3.2kW, IP23
Variable speed drive ATV71 – 132kW-200HP – 480V – EMC filter-graphic terminal
Variable speed drive ATV71 - 132kW-200HP - 480V - EMC filter-graphic terminal
Reviews
There are no reviews yet.