8911 definite purpose starters are inexpensive starters for applications with relatively low duty cycles. Typical applications include air compressors, agricultural equipment, pumps, and HVAC equipment. This three pole definite purpose starter has a full load rating of 50 amperes. This starter has ratings of 3 HP at 115 VAC and 10 HP at 230 VAC single phase. It has a 15 HP at 230 VAC, 30 HP at 460 VAC and at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 220/208 to 240 VAC 50/60 Hz coil. The starter has straight through wiring. The melting alloy type overload relay uses Type B thermal units to sense over current conditions. This definite purpose contactor is an open device without an enclosure. Enclosure is 6.73 inches tall, 3.50 inches wide and 4.09 inches deep. Auxiliary contacts are available for these starters. 8911DPS definite purpose starters are UL component recognized.
NEMA Starter, Definite Purpose, 50A, 30HP at 600VAC, 3 phase, 3 pole, melting alloy, 208V to 240VAC coil, open
NEMA Starter, Definite Purpose, 50A, 30HP at 600VAC, 3 phase, 3 pole, melting alloy, 208V to 240VAC coil, open
Related products
Starter, Definite Purpose, nonreversing, 50A, 3 pole, 3 phase, 120 VAC coil, melting alloy overload, NEMA 1, +options
Starter, Definite Purpose, nonreversing, 50A, 3 pole, 3 phase, 120 VAC coil, melting alloy overload, NEMA 1, +options
NEMA starter, Type DPS, reversing, horizontal, Size 4, 135A, 100 HP at 575VAC, 10 kA SCCR, 3 phase, 3 pole, melting alloy overload, 120VAC coil, open
NEMA starter, Type DPS, reversing, horizontal, Size 4, 135A, 100 HP at 575VAC, 10 kA SCCR, 3 phase, 3 pole, melting alloy overload, 120VAC coil, open
STARTER 600VAC 40AMP DPS +OPTIONS
STARTER 600VAC 40AMP DPS +OPTIONS
STARTER MOTOR CONTROL 1000VAC
STARTER MOTOR CONTROL 1000VAC
STARTER MOTOR CONTROL 1000VAC
STARTER MOTOR CONTROL 1000VAC
NEMA starter, Type S, reversing, horizontal, Size 4, 135A, 100 HP at 575VAC, 10 kA SCCR, 3 phase, 3 pole, melting alloy overload, 120VAC coil, open
NEMA starter, Type S, reversing, horizontal, Size 4, 135A, 100 HP at 575VAC, 10 kA SCCR, 3 phase, 3 pole, melting alloy overload, 120VAC coil, open
STARTER MOTOR CONTROL <1000VAC
STARTER MOTOR CONTROL <1000VAC
Starter, Definite Purpose, nonreversing, 30A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1
Starter, Definite Purpose, nonreversing, 30A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1
Reviews
There are no reviews yet.