Power outlet panels provide temporary power for construction sites. Each receptacle is protected by a QO-GFI circuit breaker in compliance with NEC® requirements. Boxes have provisions for type “B’’ hubs to be field-installed. This power outlet panel is rated at 70A, 120/240 VAC single phase, three wire. Each panel has one QO220GFI and two QO120GFI circuit breakers. Each panel has one 20A, 250 VAC, 2 wire and ground receptacle and two 20A, 125 VAC, 2 wire and ground electrical receptacles. The panel has a 10 kA short circuit current rating. A full line of factory installed accessories are available. The screw clamp terminals will accept 8 AWG to 1 AWG copper or aluminum wire. These power outlet panels are UL Listed as suitable for use as temporary site service equipment.
Panel, power outlet, construction, configuration 7C, 1 phase, 3 wire, 120/240VAC, 70A, NEMA 3R
Panel, power outlet, construction, configuration 7C, 1 phase, 3 wire, 120/240VAC, 70A, NEMA 3R
Related products
Non-reversing Contactor – Starter Enclosure – NEMA Size 0-1 – NEMA 4 SS
Non-reversing Contactor - Starter Enclosure - NEMA Size 0-1 - NEMA 4 SS
Harmony XAP, XB2 SL, Empty control station, zinc alloy, yellow lid, blue base, 1 cut-out, Ø22, 80 x 80 x 77 mm
Harmony XAP, XB2 SL, Empty control station, zinc alloy, yellow lid, blue base, 1 cut-out, Ø22, 80 x 80 x 77 mm
Panel, power outlet, construction, configuration 2C, 1 phase, 2 wire, 120VAC, 40A, NEMA 3R
Panel, power outlet, construction, configuration 2C, 1 phase, 2 wire, 120VAC, 40A, NEMA 3R
Wall mounted enclosure, Spacial S3X, stainless steel 304L, plain door, 500x400x200mm, IP66
Wall mounted enclosure, Spacial S3X, stainless steel 304L, plain door, 500x400x200mm, IP66
Floor standing polyester enclosure, Thalassa PLA, plain door, ventilated canopy, 1250x750x420mm, IP44, IK10
Floor standing polyester enclosure, Thalassa PLA, plain door, ventilated canopy, 1250x750x420mm, IP44, IK10
Floor standing polyester enclosure, Thalassa PLA, open bottom, ventilated canopy, 750x750x420mm, IP44, IK10
Floor standing polyester enclosure, Thalassa PLA, open bottom, ventilated canopy, 750x750x420mm, IP44, IK10
LH MOLDED CASE SWITCH 600V, 3P, NEMA 1 & 3R
LH MOLDED CASE SWITCH 600V, 3P, NEMA 1 & 3R
Empty enclosure control station, Harmony 9001K, Harmony 9001SK, plastic, 2 cut-outs, 30mm, for 3/4-14 NPT cable entry
Empty enclosure control station, Harmony 9001K, Harmony 9001SK, plastic, 2 cut-outs, 30mm, for 3/4-14 NPT cable entry
Reviews
There are no reviews yet.