This product is part of the PacDrive 3 range, an offer of motion controllers for automating machines/lines. This motion controller offers 4 axis, 8 discrete inputs, 4 for touch probe input conforming to IEC 61131-2 type 1. It is a motion controller with a rated supply voltage of 24VDC, a discrete output current of 500mA and a power consumption of 30W. It is an IP20 rated product. Its dimensions are 44mm (width) x 222mm (depth) x 270mm (height). It weighs 2.2kg. This product is certified by CULus, CSA, CE, EAC. It meets CSA C22.2 No 14, CSA C22.2 No 274, EN/IEC 61131-2, UL 508C standards. Motion controllers for automating machines/lines with 0 – 130 servo or robot axes. PacDrive 3 LMC controllers provide scalable performance for synchronizing up to 130 servo axes at 1msnetwork update rate and for up to 255 virtual axes.
Motion controller LMC101 4 axis – Acc kit – Basic
Motion controller LMC101 4 axis – Acc kit – Basic
SKU: 480290
Category: Motion Control
Reviews (0)
Be the first to review “Motion controller LMC101 4 axis – Acc kit – Basic” Cancel reply
Related products
Ethernet TCP/IP managed switch – ConneXium – 7TX/1FX – multimode
Ethernet TCP/IP managed switch - ConneXium - 7TX/1FX - multimode
Hybrid Cable Lexium 62 distr. box (DB)- DB/Lexium 62 ILM integr. drive, 7 m
Hybrid Cable Lexium 62 distr. box (DB)- DB/Lexium 62 ILM integr. drive, 7 m
pre-assembled cable kit – I/O for motion sequence – 3 m
pre-assembled cable kit - I/O for motion sequence - 3 m
servo motor BMH, Lexium 32, 8.4Nm, 6000rpm, keyed shaft, without brake, IP54, 16bit encoder, straight
servo motor BMH, Lexium 32, 8.4Nm, 6000rpm, keyed shaft, without brake, IP54, 16bit encoder, straight
3-phase stepper motor – 4.52Nm – shaft Ø 9.5mm – L=98 mm – w/o brake – term box
3-phase stepper motor - 4.52Nm - shaft Ø 9.5mm - L=98 mm - w/o brake - term box
Advanced control unit, TeSys U, 0.35-1.4A, 3P motors, protection & diagnostic, class 20, coil 24V AC
Advanced control unit, TeSys U, 0.35-1.4A, 3P motors, protection & diagnostic, class 20, coil 24V AC
Absolute encoder Ø 90 single turn – through shaft 30 mm – push-pull 13-bit Gray
Absolute encoder Ø 90 single turn - through shaft 30 mm - push-pull 13-bit Gray
Incremental encoder Ø 58 – through shaft 14 mm – 1024 points – push-pull
Incremental encoder Ø 58 - through shaft 14 mm - 1024 points - push-pull
Reviews
There are no reviews yet.