Homeline All In One combination service entrance devices are available with ring or ringless type meter socket designs. Devices have factory installed service disconnect(s) in most cases. Supplied with 100% branch neutrals, all unused terminals may be used for equipment grounding wires. These Homeline combination service entrance devices meet the Federal Specification W-P-115c as Type 1, Class 2 specifications. This Homeline All In One combination service entrance device has a ringed meter socket with a Class 320 Manual bypass. The socket has 4 jaws. This unit can be feed from an underground service. The service disconnect is a QDL22200 with a maximum rating of 200 A. Device has a 25 kA short circuit current rating. Load center has 30 spaces which will accept up to 10 tandem Homeline circuit breakers. This unit has a NEMA 3R surface mount enclosure that is 41.25 inches tall, 28.25 inches wide and 7.50 inches deep. The line side has two studs. The service ground lug will accept 4 AWG to 250 kcmil copper or aluminum wire. This Homeline All In One combination service entrance unit is UL Listed.
All in one, Homeline, CSED, ringed socket, 400A, surface/semi, 30 spaces, 40 circuits, 25kA SCCR, 320 manual bypass
All in one, Homeline, CSED, ringed socket, 400A, surface/semi, 30 spaces, 40 circuits, 25kA SCCR, 320 manual bypass
SKU: 172542576
Category: Meters & Accessories
Reviews (0)
Be the first to review “All in one, Homeline, CSED, ringed socket, 400A, surface/semi, 30 spaces, 40 circuits, 25kA SCCR, 320 manual bypass” Cancel reply
Related products
Branch unit, EZ Meter-Pak, 125A, 6 sockets, 208Y/120VAC, no bypass, ringed, 1200A copper busbar
Branch unit, EZ Meter-Pak, 125A, 6 sockets, 208Y/120VAC, no bypass, ringed, 1200A copper busbar
Branch unit, EZ Meter-Pak, 125A, 4 sockets, 208Y/120VAC, horn bypass, ringless, 1200A Cu busbar
Branch unit, EZ Meter-Pak, 125A, 4 sockets, 208Y/120VAC, horn bypass, ringless, 1200A Cu busbar
Branch unit, EZ Meter-Pak, 225A, 5 x 5 jaw sockets, 208Y/120VAC, horn bypass, ringless, 1200A Cu busbar
Branch unit, EZ Meter-Pak, 225A, 5 x 5 jaw sockets, 208Y/120VAC, horn bypass, ringless, 1200A Cu busbar
Meter mains, Homeline, CSED, ringed socket, 200A, outdoor semi flush mount, maximum 8 spaces, 16 circuits, no bypass
Meter mains, Homeline, CSED, ringed socket, 200A, outdoor semi flush mount, maximum 8 spaces, 16 circuits, no bypass
Meter mains, QO, CSED, ringless socket, 150A, surface mount, maximum 8 spaces, 16 circuits, no bypass
Meter mains, QO, CSED, ringless socket, 150A, surface mount, maximum 8 spaces, 16 circuits, no bypass
Branch unit, EZ Meter-Pak, 225A, 2 x 5 sockets, 208Y/120VAC, no bypass, ringless, 1200A Al/Cu busbar
Branch unit, EZ Meter-Pak, 225A, 2 x 5 sockets, 208Y/120VAC, no bypass, ringless, 1200A Al/Cu busbar
EZ Meter Pak, transition section, right, 1200 A bus, 120/240 VAC single phase
EZ Meter Pak, transition section, right, 1200 A bus, 120/240 VAC single phase
Reviews
There are no reviews yet.