Linergy NEMA sectional terminal blocks are for terminating wires in a control panel and are designed to NEMA standards. This terminal block has a box lug connector for use with solid or stranded copper wires from #22 through #8 AWG. Each box lug terminal is approved for use with various wire combinations. Each lug accepts 1 #8 AWG, 1 # 10 AWG, 1 or 3 #12 AWG, 1 or 4 #14 AWG, 1 to 4 #16 AWG, 1 to 5 #18 AWG, 1 to 8 #20 AWG or 1 to 10 #22 AWG wires. The nylon block is molded in blue. This block is UL component recognized and CSA certified for up to 60 ampere and up to 600 VAC or VDC.
Terminal block, Linergy, box lug connector, blue colored block, 60A, 600V
Terminal block, Linergy, box lug connector, blue colored block, 60A, 600V
Related products
Mounting plate, Linergy HK, 2P, 25A, 4.4mm²105x54x61mm
Mounting plate, Linergy HK, 2P, 25A, 4.4mm²105x54x61mm
Marker, Linergy TR cable ends, yellow, clipin type, character A to Z, set of 200
Marker, Linergy TR cable ends, yellow, clipin type, character A to Z, set of 200
Cable ends, Linergy TR cable ends, single conductor, grey, 0.75mm², for insulated cable, short size, 10 sets of 100
Cable ends, Linergy TR cable ends, single conductor, grey, 0.75mm², for insulated cable, short size, 10 sets of 100
Plug-in bridge, Linergy TR, 4 points, for 2.5mm² terminal blocks, red, 4 way, set of 50
Plug-in bridge, Linergy TR, 4 points, for 2.5mm² terminal blocks, red, 4 way, set of 50
Terminal Blocks, Linergy, plugin bridge jumper, for 6.2mm wide blocks, 3 points, red
Terminal Blocks, Linergy, plugin bridge jumper, for 6.2mm wide blocks, 3 points, red
Terminal block, Linergy, mounting track, 35 mm DIN rail, with slotted mounting holes, 16 inches long
Terminal block, Linergy, mounting track, 35 mm DIN rail, with slotted mounting holes, 16 inches long
SPRING TERMINAL, KNIFE DISCONNECT, 2 POINTS, 2,5MM², ORANGE
SPRING TERMINAL, KNIFE DISCONNECT, 2 POINTS, 2,5MM², ORANGE
Terminal block – 125A – 14 holes
Terminal block - 125A - 14 holes
Reviews
There are no reviews yet.