Linergy NEMA sectional terminal blocks are for terminating wire and are designed to NEMA standards. Terminal markers are used to identify each terminal block terminal to aid in wiring and trouble shooting. These vinyl marking strips can be inserted on the top of the 9080GA6 or 9080GP6 terminal blocks. The numbers 1 through 25 are spaced appropriately to properly align with the terminal blocks in the assembly.
Terminal block, Linergy, marking strip, numbered 1 to 25, for 9080GA6 or 9080GP6 terminal blocks
Terminal block, Linergy, marking strip, numbered 1 to 25, for 9080GA6 or 9080GP6 terminal blocks
Related products
Terminal Blocks, Linergy, plugin bridge jumper, for 6.2mm wide blocks, 3 points, red
Terminal Blocks, Linergy, plugin bridge jumper, for 6.2mm wide blocks, 3 points, red
Cover plate, Linergy TR, 2 points, 2.2mm width, for spring terminals NSYTRR42, 4mm², grey, Set of 50
Cover plate, Linergy TR, 2 points, 2.2mm width, for spring terminals NSYTRR42, 4mm², grey, Set of 50
Terminal block, Linergy, end barrier, orange color, for 9080GM6 or 9080GR6 terminal block
Terminal block, Linergy, end barrier, orange color, for 9080GM6 or 9080GR6 terminal block
Cover plate, Linergy TR, 2.2mm width, 4 points, for push-in disconnect terminal NSYTRP2, grey, Set of 50
Cover plate, Linergy TR, 2.2mm width, 4 points, for push-in disconnect terminal NSYTRP2, grey, Set of 50
Cable ends, Linergy TR cable ends, single conductor, yellow, 0.25mm², short size, 10 sets of 100
Cable ends, Linergy TR cable ends, single conductor, yellow, 0.25mm², short size, 10 sets of 100
Terminal block – 125A – 14 holes
Terminal block - 125A - 14 holes
Terminal Blocks, Linergy, feed through, 30A, 150V, screw termination, 3 points, 26AWG to 10AWG, grey
Terminal Blocks, Linergy, feed through, 30A, 150V, screw termination, 3 points, 26AWG to 10AWG, grey
SPRING TERMINAL, KNIFE DISCONNECT, 2 POINTS, 2,5MM², ORANGE
SPRING TERMINAL, KNIFE DISCONNECT, 2 POINTS, 2,5MM², ORANGE
Reviews
There are no reviews yet.