Homeline All In One combination service entrance devices are available with ring or ringless type meter socket designs. Devices have factory installed service disconnect(s) in most cases. Supplied with 100% branch neutrals, all unused terminals may be used for equipment grounding wires. These Homeline combination service entrance devices meet the Federal Specification W-P-115c as Type 1, Class 2 specifications. This Homeline All In One combination service entrance device has a ringed meter socket with a Class 320 Manual bypass. The socket has 4 jaws. This unit can be feed from an underground service. The service disconnect can be a QDL, QGL or QJL circuit breaker with a maximum rating of 200 A. Device has a SCCR rating of 10 kA with a QBL, of 25 kA with QDL, of 65 kA with QGL or of 100 kA with a QJL breaker. Load center has 30 spaces which will accept up to 10 tandem Homeline circuit breakers. This unit has a NEMA 3R surface mount enclosure that is 41.25 inches tall, 28.25 inches wide and 7.50 inches deep. The line side has two studs. The service ground lug will accept 4 AWG to 250 kcmil copper or aluminum wire. This Homeline All In One combination service entrance unit is UL Listed.
Homeline All In One combination service entrance device, semi flush, ringed socket, manual bypass, UG, 400 A, 30 spaces
Homeline All In One combination service entrance device, semi flush, ringed socket, manual bypass, UG, 400 A, 30 spaces
	
			
		SKU: 172542497
	
	Category: Meters & Accessories
	
	
							
											
				Reviews (0)
				
					
						
							
	
			
					
		
	
	
						
					
				
			
					
		Be the first to review “Homeline All In One combination service entrance device, semi flush, ringed socket, manual bypass, UG, 400 A, 30 spaces” Cancel reply	
				Related products
Switchgear accessory, Masterclad, bus boot, 1.2kA/3kA
					Switchgear accessory, Masterclad, bus boot, 1.2kA/3kA				
			Meter mains, QO, CSED, ringless socket, 200A, surface mount, horn bypass
					Meter mains, QO, CSED, ringless socket, 200A, surface mount, horn bypass				
			PowerLogic ION9000 retrofit mounting adapter kit from ION7650/7550 installation
					PowerLogic ION9000 retrofit mounting adapter kit from ION7650/7550 installation				
			Branch unit, EZ Meter-Pak, 225A, 5 x 5 jaw sockets, 208Y/120VAC, horn bypass, ringless, 1200A Cu busbar
					Branch unit, EZ Meter-Pak, 225A, 5 x 5 jaw sockets, 208Y/120VAC, horn bypass, ringless, 1200A Cu busbar				
			Branch unit, EZ Meter-Pak, 225A, 2 x 5 sockets, 208Y/120VAC, no bypass, ringless, 1200A Al/Cu busbar
					Branch unit, EZ Meter-Pak, 225A, 2 x 5 sockets, 208Y/120VAC, no bypass, ringless, 1200A Al/Cu busbar				
			ION8650 meter 128MB, 9S/29S/36S, 120VAC/160VDC 60Hz, Full comm 3I+4O
					ION8650 meter 128MB, 9S/29S/36S, 120VAC/160VDC 60Hz, Full comm 3I+4O				
			PowerLogic EM3500 – Mounting option enclosure with door – for 4 EM35xx series
					PowerLogic EM3500 - Mounting option enclosure with door - for 4 EM35xx series				
			Main circuit breaker unit, EZ Meter-Pak, 1200A, 120/240VAC, 1ph/3W, 1200A bus, 100kA, UG, Type 3R, ERMS
					Main circuit breaker unit, EZ Meter-Pak, 1200A, 120/240VAC, 1ph/3W, 1200A bus, 100kA, UG, Type 3R, ERMS				
			
		
								
								
		
		
		
		
		
		
		
Reviews
There are no reviews yet.