This product is part of the Lexium SD3 range, an offer of stepper motors for motion control. The 6-pole stepper motor with 19mm parallel key shaft, centering collar of 56mm, without holding brake and second shaft end. It is a 3-phase stepper motor with a rated current of 4.1A, a mechanical speed of 3000RPM and a supply voltage of 230V AC, 325V DC. It is furnished with terminal box for electrical connection. The shaft dimensions are 19mm (diameter) x 40mm (length). It offers service life of about 20,000 hours (bearing). It is an IP41 and IP56 rated product. Its dimensions are 180mm (length) and the centering collar dimensions are 3mm (depth) x 56mm (diameter) with 125.86mm mounting hole. It weighs 8.2kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, food and beverage applications. It meets EN 50347 and IEC 60072-1 standards. This stepper motor is compatible with Lexium SD3 motor drives. It supports 110mm flange mount with a natural convection cooling system. It has 4 mounting holes with 9mm diameter. The SD3 is a universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Lexium SD3, three-phase range up to 19.7Nm with high accuracy and high torque at low rotation speeds.
3-phase stepper motor – 13.5 Nm – shaft Ø19mm – L=180mm – w/o brake – term box
3-phase stepper motor – 13.5 Nm – shaft Ø19mm – L=180mm – w/o brake – term box
SKU: 517153
Category: Motion Control
Reviews (0)
Be the first to review “3-phase stepper motor – 13.5 Nm – shaft Ø19mm – L=180mm – w/o brake – term box” Cancel reply
Related products
braking resistor – 72 ohm – 200 W – cable 0.75 m – IP65
braking resistor - 72 ohm - 200 W - cable 0.75 m - IP65
power cable – between servomotor BDH, BSH and servodrive – 4×1.5mm²+2x1mm² – 25m
power cable - between servomotor BDH, BSH and servodrive - 4x1.5mm²+2x1mm² - 25m
3-phase stepper motor – 6.78Nm – shaft Ø 14mm – L=128 mm – w/o brake – term box
3-phase stepper motor - 6.78Nm - shaft Ø 14mm - L=128 mm - w/o brake - term box
motion control stepper motor drive – SD326 – pulse/direction – <= 2.5 A
motion control stepper motor drive - SD326 - pulse/direction - <= 2.5 A
Double Drive, Lexium 62, 6 A, Emb. Safety, accessory kit included
Double Drive, Lexium 62, 6 A, Emb. Safety, accessory kit included
Incremental encoder Ø 58 – through shaft 14 mm – 1024 points – push-pull
Incremental encoder Ø 58 - through shaft 14 mm - 1024 points - push-pull
preassembled cord set for RS422 control – for LXM05 – 1.5 m
preassembled cord set for RS422 control - for LXM05 - 1.5 m
double drive connectors and sercos cable, Lexium 62, single drive, 0.09m
double drive connectors and sercos cable, Lexium 62, single drive, 0.09m
Reviews
There are no reviews yet.